Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - AUDIO / VIDEO
RADIO ANTENNA CORD - REMOVAL
| 1. PRECAUTION |
- NOTICE:
- After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work ().
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
| 3. REMOVE ROOF HEADLINING ASSEMBLY |
w/o Sliding Roof:
Remove the roof headlining assembly ().
w/ Sliding Roof:
Remove the roof headlining assembly ().
| 4. REMOVE ANTENNA CORD SUB-ASSEMBLY |
w/o Sliding Roof:
Detach the 2 clamps and remove the antenna from the notch on the rear of the roof headlining.
Remove the antenna cord from the roof headlining.
Remove the double-sided tape from the roof headlining.
w/ Sliding Roof:
Detach the 4 clamps and remove the antenna from the notch on the rear of the roof headlining.
Remove the antenna cord from the roof headlining.
Remove the double-sided tape from the roof headlining.
| 5. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY |
Remove the instrument panel safety pad ().
| 6. REMOVE ANTENNA CORD SUB-ASSEMBLY (w/ Multi-display) |
for LHD:
Detach the 8 clamps and remove the antenna cord.
for RHD:
Detach the 6 clamps and remove the antenna cord.
| 7. REMOVE ANTENNA CORD SUB-ASSEMBLY (w/o Multi-display) |
for LHD:
Detach the 7 clamps and remove the antenna cord.
for RHD:
Detach the 5 clamps and remove the antenna cord.
