PILLAR SPEAKER (for Front Side) - REMOVAL

1. PRECAUTION

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work ().

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().

3. REMOVE FRONT ASSIST GRIP SUB-ASSEMBLY

Detach the 4 claws and remove the 2 assist grip plugs.

Remove the 2 bolts.

Detach the 2 claws and remove the front assist grip.

4. REMOVE FRONT PILLAR GARNISH LH

Detach the clip and 3 guides, and remove the front pillar garnish.

for 9, 14 Speakers:

Disconnect the speaker connector and then remove the front pillar garnish.

Protect the curtain shield airbag.

Thoroughly cover the airbag with a cloth or nylon sheet and fix the ends of the cover with adhesive tape, as shown in the illustration.

Cover the curtain shield airbag with a protective cover as soon as the front pillar garnish is removed.

5. REMOVE FRONT NO. 3 SPEAKER ASSEMBLY

Detach the 3 claws and remove the speaker.