Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - PARK ASSIST / MONITORING
PARKING ASSIST MONITOR SYSTEM (w/o Side Monitor System) - DIAGNOSIS SYSTEM
| PARKING ASSIST MONITOR DIAGNOSIS SYSTEM |
For parking assist monitor system (w/o Side Monitor System) diagnosis, signals received by the multi-media module receiver assembly can be checked and the parking assist monitor system (w/o Side Monitor System) can be calibrated, adjusted and checked using the multi-media module receiver assembly.
- NOTICE:
- Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system (w/o Side Monitor System) may be needed ().
- HINT:
- The displayed items may differ depending on vehicle specifications.
| DIAGNOSIS SCREEN TRANSITION (during parking assist ECU initialization) |
| DIAGNOSIS SCREEN TRANSITION (after parking assist ECU initialization) |
| VEHICLE SIGNAL CHECK |
Start diagnostic mode ().
Select "Function Check/Setting" on the [Service Menu] screen to display the [Function Check/Setting] screen.
Select "Vehicle Signal" on the [Function Check/Setting] screen.
Vehicle Signal Check Mode:
When the [Vehicle Signal Check Mode] screen is displayed, check "REV" the vehicle signal conditions.
- HINT:
Finish diagnostic mode ().
| CAR SIGNAL CHECK (parking assist ECU input signals) |
Start diagnostic mode ().
Select "Function Check/Setting" on the [Service Menu] screen to display the [Function Check/Setting] screen.
Select "Camera Setting" on the [Function Check/Setting] screen.
Select "Next" on the [Car Information Check] screen.
- HINT:
- After "Next" is selected, the screen transitions differ depending on whether initialization of the parking assist monitor system (w/o Side Monitor System) was performed after the multi-media module receiver assembly was replaced.
| Parking Assist ECU Initialization | Screen Transition |
| Not performed | [Car Signal Check] screen |
| Performed | [Mode Setting] screen |
When the screen changes to the [Mode Setting] screen, select "Back Camera Setting" to display the [Car Signal Check] screen.
- HINT:
- To select a grayed out item, select and hold the item for 2 seconds or more.
Car Signal Check:
On the [Car Signal Check] screen, it is possible to inspect the state of signals and check the settings.
| Item | Inspection Detail | Note |
| BCTY | Back door courtesy light switch signal input | When "CHK" (red) is displayed, selecting "Next" will not change to the next screen. |
- HINT:
BCTY inspection:
- HINT:
- If "CHK" (red) is displayed for "BCTY", check for DTCs and perform troubleshooting based on the output DTCs ().
Finish diagnostic mode ().
| CALIBRATION WHEN SERVICING VEHICLE |
- NOTICE:
- Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system (w/o Side Monitor System) may be needed ().