INSPECTION PROCEDURE
CHECK VEHICLE SIGNAL (OPERATION CHECK)
NAVIGATION SYSTEM - Illumination for Panel Switch does not Come on with Tail Switch ON
INSPECTION PROCEDURE
| 1.CHECK VEHICLE SIGNAL (OPERATION CHECK) |
Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check ().
Check that the display changes between ON and OFF according to the light control switch operation.
- OK:
| Light Control Switch | Display |
| Tail or head | ON |
| Off | OFF |
- This display is updated once per second. As a result, it is normal for the display to lag behind the actual switch operation.
| | PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE ()
|
|
|
| OK | |
| |
| REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY ()
|
|
