Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - NAVIGATION / MULTI INFO DISPLAY
NAVIGATION ANTENNA (for Roof Side) - REMOVAL
| 1. PRECAUTION |
- NOTICE:
- After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work ().
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
| 3. REMOVE ROOF HEADLINING ASSEMBLY |
w/ Sliding Roof:
()
w/o Sliding Roof:
()
| 4. REMOVE NO. 5 REAR ROOF AIR DUCT |
w/o Sliding Roof:
Remove the 2 clips and duct.
w/ Sliding Roof:
Remove the 2 clips and duct.
| 5. REMOVE NO. 4 REAR ROOF AIR DUCT |
Remove the 2 clips and duct.
| 6. REMOVE NO. 3 REAR ROOF AIR DUCT |
Remove the clip and duct.
| 7. REMOVE NAVIGATION ANTENNA |
Detach the 4 claws and remove the 2 navigation antenna connectors from the protector.
Detach the 2 claws and remove the protector.
Disconnect the 2 navigation antenna connectors.
Remove the navigation antenna nut.
Detach the 2 claws and remove the navigation antenna.