Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - AUDIO / VIDEO
INSTRUMENT PANEL SPEAKER - REMOVAL
- HINT:
| 1. PRECAUTION |
- NOTICE:
- After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work ().
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
| 3. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY |
Detach the 8 claws and remove the opening cover.
| 4. REMOVE FRONT NO. 4 SPEAKER ASSEMBLY |
Remove the 2 bolts.
Remove the speaker and then disconnect the speaker connector.
- NOTICE:
- Do not touch the cone part of the speaker.
| 5. REMOVE FRONT ASSIST GRIP SUB-ASSEMBLY |
- HINT:
- Use the same procedure to remove the front assist grip on the other side.
Detach the 4 claws and remove the 2 assist grip plugs.
Remove the 2 bolts.
Detach the 2 claws and remove the front assist grip.
| 6. REMOVE FRONT PILLAR GARNISH LH |
Detach the clip and 3 guides, and remove the front pillar garnish.
for 9, 14 Speakers:
Disconnect the speaker connector and then remove the front pillar garnish.
Protect the curtain shield airbag.
Thoroughly cover the airbag with a cloth or nylon sheet and fix the ends of the cover with adhesive tape, as shown in the illustration.
- NOTICE:
- Cover the curtain shield airbag with a protective cover as soon as the front pillar garnish is removed.
| 7. REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY |
Detach the 4 claws and remove the speaker panel.
| 8. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY |
for 9 Speakers Models:
Remove the 2 bolts.
Remove the speaker and then disconnect the speaker connector.
- NOTICE:
- Do not touch the cone part of the speaker.
except 9 Speakers Models:
Remove the 2 bolts.
Remove the speaker and then disconnect the speaker connector.
- NOTICE:
- Do not touch the cone part of the speaker.