Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - G-BOOK
G-BOOK SYSTEM - REGISTRATION
| 1. VEHICLE CONTRACT SETTING |
- HINT:
- If the multi-media module receiver assembly is replaced on vehicles that do not have a contract for the G-BOOK service, perform the vehicle contract setting.
Contact the G-BOOK center.
Contact the G-BOOK center to inform them that vehicle contract setting will be performed.
- HINT:
- After contacting the G-BOOK center, the center will send a Vehicle Contract Setting Request Form by fax.
Check the ID before replacement (when diagnosis can be activated).
- HINT:
- If the multi-media module receiver assembly is replaced, check the G-BOOK ID.
Enter diagnostic mode ().
Select "Service Information" on the "Service Menu" screen.
Select "G-BOOK Info for Contract" on the "Service Information" screen.
Check the G-BOOK ID.
Replace the multi-media module receiver assembly.
Replace the multi-media module receiver assembly at a dealership.
Check the ID after replacement.
- HINT:
- If the multi-media module receiver assembly is replaced, check the G-BOOK ID.
Enter diagnostic mode ().
Select "Service Information" on the "Service Menu" screen.
Select "G-BOOK Info for Contract" on the "Service Information" screen.
Check the G-BOOK ID.
Fill-in the Vehicle Contract Setting Request Form.
After filling in the Vehicle Contract Setting Request Form, send it back to the G-BOOK center.
| Item | Information to Enter | Note |
| *1 | Enter the dealership name of the applicant. | Applicant information |
| *2 | Enter the name of the applicant. | Applicant information |
| *3 | Enter the fax number of the dealership. | Dealership information |
| *4 | Enter the phone number of the dealership. | Dealership information |
| *5 | Enter the VIN of the vehicle. | Vehicle information |
| *6 | Enter the G-BOOK ID of the old unit. Left-align the number. If the multi-media module receiver assembly is not being replaced, it is not necessary to enter this item. | Used as change-request information from the dealership |
| *7 | - | - |
| *8 | Enter the G-BOOK ID of the new unit installed to the vehicle. Left-align the number. If the multi-media module receiver assembly is not being replaced, it is not necessary to enter this item. | Used as change-request information from the dealership |
| *9 | - | - |
| *10 | - | - |
| *11 | Enter the mileage on the odometer when the multi-media module receiver assembly is replaced. | Used as change-request information from the dealership |
| *12 | Enter the date that the mileage was recorded. | Used as change-request information from the dealership |
Perform the procedure to resume the G-BOOK service.
- HINT:
- The screen illustrations provided are samples only and may be different from actual screens.
Perform the operations shown in the illustration and select G-BOOK.com.
Check that G-BOOK.com is displayed.
After the guidance screen is displayed, perform the procedure to resume the G-BOOK service by following the instructions on the screen.