FRONT AND SIDE MONITOR MAIN SWITCH - INSTALLATION

Use the same procedure for RHD and LHD vehicles.

The procedure listed below is for LHD vehicles.

1. INSTALL MAIN SWITCH ASSEMBLY

Attach the 2 claws to install the main switch assembly.

2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

w/o Multi-information Display:

Connect the connector.

w/ Multi-information Display:

Connect the 2 connectors.

Attach the 9 claws to install the finish panel.

Attach the 4 claws.

3. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

Attach the 2 claws to install the No. 2 instrument cluster finish panel garnish.

Front And Side Monitor Main Switch - Installation. PARK ASSIST / MONITORING. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Text in Illustration
*A	w/ Entry and Start System	*B	w/o Entry and Start System

4. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

Connect the connectors and attach the 2 clamps.

Attach the 8 claws to install the lower instrument panel pad sub-assembly.

Install the clip and screw.

5. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

Attach the 7 claws to install the No. 2 instrument panel finish panel cushion.

6. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

Attach the 3 claws to install the No. 1 instrument cluster finish panel garnish.

7. INSTALL INSTRUMENT SIDE PANEL LH

Attach the 6 claws to install the instrument side panel.

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Reset the Autoaway/Return function setting to the previous condition by changing the customize parameter ().

When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().