DESCRIPTION
INSPECTION PROCEDURE
CLEAR DTC
CHECK DTC (CAN COMMUNICATION SYSTEM)
DTC U0073 Sending Malfunction (Navigation to APGS)
DTC U0100 Engine ECU Communication
DTC U0126 Steering Sensor Communication
DTC U0140 Lost Communication with Body Control Module
DTC U0155 Meter ECU Communication
DTC U1110 Clearance Sonar ECU Communication
DESCRIPTION
These DTCs are stored when a malfunction occurs in the CAN communication circuit.
| DTC Code | DTC Detection Condition | Trouble Area |
| U0073 |
CAN bus connection error | CAN communication system |
| U0100 |
CAN reception error |
| U0126 |
CAN reception error |
| U0140 |
CAN reception error |
| U0155 |
CAN reception error |
| U1110 |
CAN reception error |
INSPECTION PROCEDURE
| 2.CHECK DTC (CAN COMMUNICATION SYSTEM) |
Recheck for DTCs and check if the same DTCs are output again.
Result| Result | Proceed to |
| No DTCs are output | A |
| DTCs are output (for LHD) | B |
| DTCs are output (for RHD) | C |
| | GO TO CAN COMMUNICATION SYSTEM ()
|
|
|
| | GO TO CAN COMMUNICATION SYSTEM ()
|
|
|
| A | |
| |
| USE SIMULATION METHOD TO CHECK ()
|
|