Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - AUDIO / VIDEO
DTC CB-45 USB Communication Error
DTC CB-46 iPod Control Error
DTC CB-47 iPod Communication Error
DESCRIPTION
| DTC No. | DTC Detection Condition | Trouble Area |
| CB-45 | Communication error with USB device | Multi-media interface ECU USB device |
| CB-46 | "iPod" control software malfunction | Multi-media interface ECU "iPod" |
| CB-47 | Communication error with "iPod" |
INSPECTION PROCEDURE
- HINT:
- After the inspection is completed, clear the DTCs.
| 1.REPLACE USB DEVICE OR "iPod" |
Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.
Turn the engine switch off.
- HINT:
- When one of these DTCs has been stored, it is necessary to turn off the engine switch to make it possible for the vehicle to recognize a new device when it is connected.
Turn the engine switch on (ACC).
Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.
- HINT:
If the malfunction occurred when a USB device was in use, use another USB device for the inspection. If the malfunction occurred when an "iPod" was in use, use another "iPod" for the inspection.
| NEXT | |
| 2.CLEAR DTC |
Clear the DTCs ().
| NEXT | |
| 3.RECHECK FOR DTC |
Recheck for DTCs and check if the same DTC occurs again.
- HINT:
- If DTCs are detected frequently, replace the multi-media interface ECU.
- OK:
- Malfunction disappears.
|
| ||||
| OK | ||
| ||