Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - PARK ASSIST / MONITORING
DTC C1693 Side Camera Initialization Incomplete
DESCRIPTION
This DTC is stored when the parking assist ECU judges that the side camera initial setting has not been memorized (side television camera optical axis adjustment is incompleted).
| DTC Code | DTC Detection Condition | Trouble Area |
| C1693 | Side camera initial setting has not been memorized | Side television camera optical adjustment Parking assist ECU |
INSPECTION PROCEDURE
- NOTICE:
When "System initializing" is displayed on the parking assist ECU after the cable is disconnected from the negative (-) battery terminal, correct the steering angle neutral point ().
Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the side monitor system may be needed ().
| 1.ADJUST SETTINGS |
Perform the following procedure depending on the memory conditions to register the vehicle information into the parking assist ECU.
Refer to side television camera optical axis adjustment ().
| NEXT | |
| 2.CHECK FOR DTC |
Clear the DTCs ().
Check for DTCs ().
- OK:
- DTC C1693 is not output.
- HINT:
If DTC C1693 is output, perform the side television camera assembly optical axis adjustment again.
If DTC C1693 is still output after performing the rear television camera assembly optical axis adjustment 3 times, replace the parking assist ECU.
|
| ||||
| OK | ||
| ||