DESCRIPTION
INSPECTION PROCEDURE
REPLACE STEERING SENSOR
CHECK FOR DTC
DTC C1626 Steering Angle Sensor Failure
DESCRIPTION
This DTC is stored if the parking assist ECU receives a signal via CAN communication from the steering sensor that indicates an internal malfunction.
| DTC Code | DTC Detection Condition | Trouble Area |
| C1626 |
A fail flag is transmitted from the steering angle sensor. |
Steering sensor
Parking assist ECU
|
INSPECTION PROCEDURE
When "System initializing" is displayed on the parking assist ECU after the battery terminal disconnected, correct the steering angle neutral point ().
Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system (w/ Side Monitor System) may be needed ().
| 1.REPLACE STEERING SENSOR |
Replace the steering sensor with a normally functioning one ().
Check for DTCs ().
- OK:
- DTC C1626 is not output.
| | REPLACE PARKING ASSIST ECU ()
|
|
|
| OK | |
| |
| END (STEERING SENSOR IS DEFECTIVE) |
|