Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - AUDIO / VIDEO

DESCRIPTION

INSPECTION PROCEDURE

CHECK CAN COMMUNICATION SYSTEM

CHECK ENTRY AND START SYSTEM

CHECK CUSTOMIZE ITEMS

DTC B15F7 Certification ECU Vehicle Information Reading/Writing Process Malfunction

DESCRIPTION

This DTC is stored when items controlled by the certification ECU (smart key ECU assembly) cannot be customized via the audio and visual system vehicle customization screen.


  • HINT:
  • The certification ECU (smart key ECU assembly) controls the entry and start system (for Entry Function) related items that are customizable via the multi-display assembly screen.
DTC CodeDTC Detection ConditionTrouble Area
B15F7 Certification ECU (smart key ECU assembly) vehicle setting processing error.
CAN communication system
Entry and start system (for Entry Function)
Certification ECU (smart key ECU assembly)
Multi-media module receiver assembly

INSPECTION PROCEDURE

1.CHECK CAN COMMUNICATION SYSTEM

Use the intelligent tester to check if the CAN communication system is functioning normally.

for LHD ()
for RHD ()
  • OK:
  • CAN communication DTCs are not output.
Result
ResultProceed to
OKA
NG (for LHD)B
NG (for RHD)C
B
GO TO CAN COMMUNICATION SYSTEM ()
C
GO TO CAN COMMUNICATION SYSTEM ()
A
2.CHECK ENTRY AND START SYSTEM

Check if the entry and start system is malfunctioning ().

  • HINT:
  • Customization may not be possible depending on the malfunction in the entry and start system.
  • OK:
  • No malfunctions are present in the entry and start system.
NG
GO TO ENTRY AND START SYSTEM ()
OK
3.CHECK CUSTOMIZE ITEMS

Display the "Vehicle Customization" screen.

Make a note of the customizable items for each certification ECU related system.

  • HINT:
  • These items shown as customizable via the multi-display assembly vehicle customization screen can also be changed using the intelligent tester. In a following step, the intelligent tester will be used.

Check the customize parameters list for the entry and start system related items that can be customized via the multi-display assembly screen ().

Manually change and confirm that it was possible to successfully change the settings of the customize parameters for each system that are available for customization via the multi-display assembly screen.

  • OK:
  • The items available for customization via the multi-display assembly screen can be customized successfully using the manual procedure.
NG
REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)
OK
REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY ()
AUDIO / VIDEO
Land Cruiser URJ200 URJ202 GRJ200 VDJ200
AUDIO AND VISUAL SYSTEM w/ Navigation System