Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - AUDIO / VIDEO

DESCRIPTION

INSPECTION PROCEDURE

REPLACE USB DEVICE OR “iPod”

CLEAR DTC

CHECK DTC

DTC B1585 USB Device Malfunction

DESCRIPTION

This DTC is stored when a malfunction occurs in a connected device.

DTC CodeDTC Detection ConditionTrouble Area
B1585USB Device Malfunction
Non mass-storage class or incompatible protocol USB device
USB device with an incompatible file system, corrupted or incompatible File Allocation Table (FAT)
"iPod" malfunction
"iPod" with unsupported firmware
Unsupported "iPod" model
USB device or "iPod"
Multi-media module receiver assembly

INSPECTION PROCEDURE

1.REPLACE USB DEVICE OR “iPod”

Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.

Turn the engine switch off.

  • HINT:
  • When this DTC has been stored, it is necessary to turn off the engine switch to make it possible for the vehicle to recognize a new device when it is connected.

Turn the engine switch on (ACC).

Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.

  • HINT:
If the malfunction occurred when a USB device was in use, use another USB device for the inspection. If the malfunction occurred when an "iPod" was in use, use another "iPod" for the inspection.
Refer to System Description for compatible formats and versions ().
NEXT
2.CLEAR DTC

Clear the DTCs ().

NEXT
3.CHECK DTC

Recheck for DTCs and check if the same DTC is output again ().

  • OK:
  • No DTCs are output.
NG
REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY ()
OK
USB DEVICE FORMAT WAS INCOMPATIBLE, "iPod" VERSION WAS INCOMPATIBLE, OR USB DEVICE OR "iPod" WAS DEFECTIVE