Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - AUDIO / VIDEO
DIGITAL AUDIO BROADCASTING ANTENNA - REMOVAL
| 1. PRECAUTION |
- NOTICE:
- After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work ().
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
| 3. REMOVE ROOF HEADLINING ASSEMBLY |
w/ Sliding Roof:
()
w/o Sliding Roof:
()
| 4. REMOVE NO. 2 REAR ROOF AIR DUCT |
w/o Sliding Roof:
Remove the 2 clips and duct.
w/ Sliding Roof:
Remove the 2 clips and duct.
| 5. REMOVE NO. 5 REAR ROOF AIR DUCT |
w/o Sliding Roof:
Remove the 2 clips and duct.
w/ Sliding Roof:
Remove the 2 clips and duct.
| 6. REMOVE NO. 4 REAR ROOF AIR DUCT |
Remove the 2 clips and duct.
| 7. REMOVE NO. 3 REAR ROOF AIR DUCT |
Remove the clip and duct.
| 8. REMOVE NO. 1 REAR ROOF AIR DUCT |
Remove the 3 clips and duct.
| 9. REMOVE DIGITAL AUDIO BROADCASTING ANTENNA ASSEMBLY |
w/o Roof Antenna:
| *a | Guide | - | - |
Disconnect the connector and remove the 2 bolts.
Detach the 7 clamps and 2 guides and remove the digital audio broadcasting antenna assembly.
w/ Roof Antenna:
| *a | Guide | - | - |
Disconnect each connector and remove the 2 bolts.
Detach the 7 clamps and 2 guides and remove the digital audio broadcasting antenna assembly.