INSPECTION PROCEDURE
CHECK IF PROPER CD IS INSERTED
CHECK THAT CD IS INSERTED PROPERLY
CLEAN CD
REPLACE CD WITH ANOTHER AND RECHECK
AUDIO AND VISUAL SYSTEM (w/o Stereo Component Amplifier) - CD cannot be Inserted or is Ejected Right After Insertion
INSPECTION PROCEDURE
1.CHECK IF PROPER CD IS INSERTED |
Make sure that the CD is a normal audio CD, and that it is not deformed, flawed, stained, burred or otherwise defective.
- Translucent or uniquely-shaped CDs cannot be played.
2.CHECK THAT CD IS INSERTED PROPERLY |
Check whether or not the CD is inserted upside down.
- OK:
- CD is properly inserted.
Clean the disc by wiping the CD underside radially with a soft cloth.
- OK:
- Malfunction disappears.
- Do not use a conventional record cleaner or anti-static preservative.
4.REPLACE CD WITH ANOTHER AND RECHECK |
Replace the CD with a normal one and check if the same problem occurs again.
- OK:
- Malfunction disappears.
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE ()
|
|
|