INSPECTION PROCEDURE
CHECK USB DEVICE OR "iPod"
FORMAT USB DEVICE OR RESTORE "iPod" AND RECHECK
REPLACE USB DEVICE OR "iPod"
CHECK USB DEVICE OR "iPod"
AUDIO AND VISUAL SYSTEM (w/o Navigation System) - USB Audio System Recognition/Play Error
INSPECTION PROCEDURE
When a large amount of data is in a USB device, it may take a while before play begins.
When using a USB device, files that are copy protected or encrypted by copyright cannot be played.
When files are not played in the sorted order, perform the following procedure before inspection.
Add numbers in front of the file names.
Put the files in a folder and copy the folder data to the USB device.
| 1.CHECK USB DEVICE OR "iPod" |
Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.
Check if playable files are present on the USB device or "iPod".
- Refer to System Description for playable files ().
Check if the USB device is a compatible format or "iPod" is a compatible version.
- Refer to System Description for compatible formats and versions ().
Result| Result | Proceed to |
| No playable files exist, or incompatible device format or version | A |
| Playable files exist, and compatible device format or version | B |
| A | |
| |
| USB DEVICE FORMAT WAS INCOMPATIBLE, "iPod" VERSION WAS INCOMPATIBLE, OR NO PLAYABLE FILES PRESENT |
|
| 2.FORMAT USB DEVICE OR RESTORE "iPod" AND RECHECK |
Delete all files in the USB device or "iPod" and format/restore it.
Save the data again and check if it can be played on the in-vehicle device.
- Formatting a USB device or restoring an "iPod" erases all music on the device.
- Ensure that backup music data is available before performing this operation.
- OK:
- Malfunction disappears.
| 3.REPLACE USB DEVICE OR "iPod" |
Turn the engine switch off.
- When this malfunction occurs, it is necessary to turn off the engine switch to make it possible for the vehicle to recognize a new device when it is connected.
Turn the engine switch on (ACC).
Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.
If the malfunction occurred when a USB device was in use, use another USB device for the inspection. If the malfunction occurred when an "iPod" was in use, use another "iPod" for the inspection.
Refer to System Description for compatible formats and versions ().
| 4.CHECK USB DEVICE OR "iPod" |
Check if USB device or "iPod" is recognized by the radio receiver assembly, or if information such as track, artist and album names are displayed on screen.
- OK:
- USB device or "iPod" is recognized or track information such as track, artist and album names are displayed.
| | PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE ()
|
|
|
| OK | |
| |
| USB DEVICE OR "iPod" WAS INCOMPATIBLE OR DEFECTIVE |
|