INSPECTION PROCEDURE
CHECK "BLUETOOTH" SETTINGS
CHECK CELLULAR PHONE
CHECK SETTINGS
CHECK CELLULAR PHONE
CHECK RECEPTION
AUDIO AND VISUAL SYSTEM (w/o Navigation System) - Cellular Phone cannot Send/Receive
INSPECTION PROCEDURE
| 1.CHECK "BLUETOOTH" SETTINGS |
Check if the "Bluetooth" settings are correct.
- OK:
- "Bluetooth" settings are correct.
Check if the cellular phone is "Bluetooth" compatible.
- Some versions of "Bluetooth" compatible cellular phones may not function.
- OK:
- Phone is "Bluetooth" compatible.
| | END (ONLY A "BLUETOOTH" COMPATIBLE CELLULAR PHONE CAN BE USED) |
|
|
Check if the cellular phone functions.
- The cellular phone is unable to call under any of the following conditions:
The cellular phone is locked.
The directory is being transferred.
The line is crossed.
Outside service range.
The power is off.
The cellular phone is not connected to "Bluetooth" ("BT" is displayed while connected).
- OK:
- None of the above conditions exist.
Check if the cellular phone can make a call.
- When the battery is low, calls cannot be made or received.
- OK:
- Cellular phone can make a call.
| | REPAIR OR REPLACE CELLULAR PHONE |
|
|
Set the cellular phone so that it can receive calls.
Place the cellular phone close to the radio receiver assembly.
Check if the cellular phone has reception according to the radio receiver assembly.
- OK:
- Cellular phone has reception.
| | REPLACE RADIO RECEIVER ASSEMBLY ()
|
|
|
| OK | |
| |
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE ()
|
|