Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - AUDIO / VIDEO
AUDIO AND VISUAL SYSTEM (w/ Navigation System) - DATA LIST / ACTIVE TEST
DATA LIST |
- NOTICE:
- In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
- HINT:
- Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body Electrical / Navigation System / Data List.
According to the display on the intelligent tester, read the Data List.
Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
Battery Voltage | Battery voltage / Min.: 0 V, Max.: 24 V | 11 to 15.5 V | - |
Active Dimmer | Active dimmer function / ON or OFF | ON: Active dimmer function on OFF: Active dimmer function off | - |
Tail Light SW | Taillight switch / ON or OFF | ON: Light control switch in tail or head position OFF: Light control switch off | - |
Reverse Signal | Reverse signal / ON or OFF | ON: Shift lever in R OFF: Shift lever in any position other than R | - |
Parking Brake | Parking brake switch / ON or OFF | ON: Parking brake applied OFF: Parking brake released | - |
Ignition | Engine switch / ON or OFF | ON: Engine switch on (IG) OFF: Engine switch off | - |
Vehicle Speed | Maximum wheel speed sensor reading / Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) | Vehicle stopped: 0 km/h (0 mph) | When driving at constant speed: No large fluctuations |