DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
CHECK DIGITAL COMMUNICATION CABLE CONNECTOR
CHECK MULTI-DISPLAY ASSEMBLY
AUDIO AND VISUAL SYSTEM (w/ Navigation System) - Display Signal Circuit between Multi-display and Radio Receiver
DESCRIPTION
The display image signal from the multi-media module receiver assembly is sent to the multi-display assembly using a digital communication cable.
WIRING DIAGRAM
INSPECTION PROCEDURE
| 1.CHECK DIGITAL COMMUNICATION CABLE CONNECTOR |
Check if the digital communication cable connectors between the multi-media module receiver assembly and the multi-display assembly have any connection problems ().
Check that the screen display is normal.
- OK:
- Screen display is normal.
| OK | |
| |
| USE SIMULATION METHOD TO CHECK ()
|
|
| 2.CHECK MULTI-DISPLAY ASSEMBLY |
Replace the multi-display assembly with a new or normally functioning one ().
Check that the screen display is normal.
- OK:
- Screen display is normal.
| | PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE ()
|
|
|
| OK | |
| |
| END (MULTI-DISPLAY ASSEMBLY IS DEFECTIVE) |
|