INSPECTION PROCEDURE
CHECK IMAGE QUALITY SETTING
CHECK VEHICLE SIGNAL (OPERATION CHECK)
AUDIO AND VISUAL SYSTEM (w/ Navigation System) - Display does not Dim when Light Control Switch is Turned ON
INSPECTION PROCEDURE
| 1.CHECK IMAGE QUALITY SETTING |
Display the "Display" screen.
Turn the light control switch to the tail or head position.
Check if "Day Mode" on the display adjustment screen is on.
Text in Illustration| *a | Example |
Result| Result | Proceed to |
| "Day Mode" setting is on. | A |
| "Day Mode" setting is off. | B |
| A | |
| |
| TURN "Day Mode" SETTING OFF |
|
| 2.CHECK VEHICLE SIGNAL (OPERATION CHECK) |
Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check ().
Check that the display changes between ON and OFF according to the light control switch operation.
- OK:
| Light Control Switch | Display |
| Tail or head | ON |
| Off | OFF |
- The display is updated once per second. It is normal for the display to lag behind the actual switch operation.
| | PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE ()
|
|
|
| OK | |
| |
| REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY ()
|
|
