Land Cruiser Prado GRJ150 TRJ150 TRJ155 KDJ150 TRJ155 LJ150 - ТОПЛИВНАЯ СИСТЕМА ДВИГАТЕЛЯ 5L-E

REMOVE FUEL FILTER ASSEMBLY

DRAIN FUEL

REMOVE FUEL FILTER CASE

REMOVE LEVEL WARNING SWITCH

REMOVE FUEL FILTER ELEMENT ASSEMBLY

INSTALL FUEL FILTER ELEMENT ASSEMBLY

INSTALL LEVEL WARNING SWITCH

INSTALL FUEL FILTER CASE

INSTALL FUEL FILTER ASSEMBLY

BLEED AIR FROM FUEL SYSTEM

INSPECT FOR FUEL LEAK

ТОПЛИВНЫЙ ФИЛЬТР - ЗАМЕНА

  • УКАЗАНИЕ:
  • When replacing the filter, use TOYOTA genuine parts or equivalent parts.
1. REMOVE FUEL FILTER ASSEMBLY
Топливный Фильтр - Замена. ТОПЛИВНАЯ СИСТЕМА ДВИГАТЕЛЯ 5L-E. Land Cruiser Prado GRJ150 TRJ150 TRJ155 KDJ150 TRJ155 LJ150

Disconnect the 2 fuel hoses.

Disconnect the level warning switch connector.

Remove the 2 nuts and fuel filter.

2. DRAIN FUEL
Топливный Фильтр - Замена. ТОПЛИВНАЯ СИСТЕМА ДВИГАТЕЛЯ 5L-E. Land Cruiser Prado GRJ150 TRJ150 TRJ155 KDJ150 TRJ155 LJ150

Loosen the fuel filter drain plug and drain the fuel from the fuel filter.

3. REMOVE FUEL FILTER CASE
Топливный Фильтр - Замена. ТОПЛИВНАЯ СИСТЕМА ДВИГАТЕЛЯ 5L-E. Land Cruiser Prado GRJ150 TRJ150 TRJ155 KDJ150 TRJ155 LJ150

Detach the level warning switch connector clamp from the fuel filter cap.

Remove the 2 bolts, fuel filter case and fuel filter gasket.

4. REMOVE LEVEL WARNING SWITCH
Топливный Фильтр - Замена. ТОПЛИВНАЯ СИСТЕМА ДВИГАТЕЛЯ 5L-E. Land Cruiser Prado GRJ150 TRJ150 TRJ155 KDJ150 TRJ155 LJ150

Clamp the fuel filter cap in a vise between aluminum plates.

  • ПРИМЕЧАНИЕ:
  • Be careful not to damage the fuel filter cap.

Using pliers, remove the level warning switch.

  • ПРИМЕЧАНИЕ:
  • Be careful not to damage the level warning switch.

Remove the warning switch gasket from the level warning switch.

5. REMOVE FUEL FILTER ELEMENT ASSEMBLY
Топливный Фильтр - Замена. ТОПЛИВНАЯ СИСТЕМА ДВИГАТЕЛЯ 5L-E. Land Cruiser Prado GRJ150 TRJ150 TRJ155 KDJ150 TRJ155 LJ150

Using SST, remove the fuel filter element.

  • SST
  • 09228-64010
6. INSTALL FUEL FILTER ELEMENT ASSEMBLY

Check and clean the installation surface of the fuel filter element.

Apply fuel to the gasket of a new fuel filter element.

Lightly screw the fuel filter element into place, and tighten it until the gasket comes into contact with the seat.

Топливный Фильтр - Замена. ТОПЛИВНАЯ СИСТЕМА ДВИГАТЕЛЯ 5L-E. Land Cruiser Prado GRJ150 TRJ150 TRJ155 KDJ150 TRJ155 LJ150

Tighten the fuel filter element an additional 3/4 turn by hand.

7. INSTALL LEVEL WARNING SWITCH

Install a new level warning switch gasket to the level warning switch.

Apply fuel to the level warning switch gasket of the level warning switch.

Топливный Фильтр - Замена. ТОПЛИВНАЯ СИСТЕМА ДВИГАТЕЛЯ 5L-E. Land Cruiser Prado GRJ150 TRJ150 TRJ155 KDJ150 TRJ155 LJ150

Install the level warning switch to the fuel filter element and tighten it by hand.

Text in Illustration
*aFront
*bWithin 28.4°
  • УКАЗАНИЕ:
  • Install the level warning switch within the angle range shown in the illustration.
8. INSTALL FUEL FILTER CASE

Install the fuel filter gasket and fuel filter case to the fuel filter element.

Топливный Фильтр - Замена. ТОПЛИВНАЯ СИСТЕМА ДВИГАТЕЛЯ 5L-E. Land Cruiser Prado GRJ150 TRJ150 TRJ155 KDJ150 TRJ155 LJ150

Tighten the 2 bolts.

  • Момент затяжки:
  • 3.4 N*m{ 35 kgf*cm, 30 in.*lbf}
  • УКАЗАНИЕ:
  • Install the level warning switch within the angle range shown in the illustration.

Attach the level warning switch connector clamp to the fuel filter cap.

Text in Illustration
*aFront
*b0 to 20°
9. INSTALL FUEL FILTER ASSEMBLY

Install the fuel filter with the 2 nuts.

  • Момент затяжки:
  • 18 N*m{ 184 kgf*cm, 13 ft.*lbf}
Топливный Фильтр - Замена. ТОПЛИВНАЯ СИСТЕМА ДВИГАТЕЛЯ 5L-E. Land Cruiser Prado GRJ150 TRJ150 TRJ155 KDJ150 TRJ155 LJ150

Connect the level warning switch connector.

Connect the 2 fuel hoses.

Text in Illustration
*aUpper
10. BLEED AIR FROM FUEL SYSTEM
Топливный Фильтр - Замена. ТОПЛИВНАЯ СИСТЕМА ДВИГАТЕЛЯ 5L-E. Land Cruiser Prado GRJ150 TRJ150 TRJ155 KDJ150 TRJ155 LJ150

Using the hand pump mounted on the fuel filter cap, bleed the air from the fuel system. Continue pumping until the pump resistance increases.

11. INSPECT FOR FUEL LEAK

Check that there are no fuel leaks anywhere in the fuel system after performing maintenance.

  • УКАЗАНИЕ:
  • When checking for fuel leaks, make sure that there is pressure in the fuel line.