Land Cruiser Prado GRJ150 TRJ150 TRJ155 KDJ150 TRJ155 LJ150 - СИСТЕМА ЗАПУСКА ДВИГАТЕЛЯ 5L-E
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE REAR ENGINE UNDER COVER ASSEMBLY
DISCONNECT CLUTCH RELEASE CYLINDER ASSEMBLY
DISCONNECT CLUTCH FLEXIBLE HOSE BRACKET
REMOVE STARTER ASSEMBLY
СТАРТЕР - СНЯТИЕ
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- ПРИМЕЧАНИЕ:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page ).
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).
2. REMOVE REAR ENGINE UNDER COVER ASSEMBLY |
Remove the 4 bolts and rear engine under cover.
3. DISCONNECT CLUTCH RELEASE CYLINDER ASSEMBLY |
Remove the 2 bolts and disconnect the release cylinder.
4. DISCONNECT CLUTCH FLEXIBLE HOSE BRACKET |
Remove the bolt and disconnect the clutch flexible hose bracket.
5. REMOVE STARTER ASSEMBLY |
Disconnect the starter connector.
Remove the terminal cap.
Remove the nut and disconnect the starter wire.
Remove the nut, 2 bolts and starter.