Land Cruiser Prado GRJ150 TRJ150 TRJ155 KDJ150 TRJ155 LJ150 - МЕХАНИЧЕСКАЯ ЧАСТЬ ДВИГАТЕЛЯ 5L-E
REMOVE FRONT BUMPER COVER LOWER
REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
REMOVE FRONT FENDER APRON SEAL RH
REMOVE RESONATOR WITH AIR CLEANER CAP SUB-ASSEMBLY
REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
REMOVE AIR CLEANER CASE ASSEMBLY
REMOVE VANE PUMP V BELT
REMOVE COOLER COMPRESSOR V BELT
REMOVE FAN AND GENERATOR V BELT
ПРИВОДНОЙ РЕМЕНЬ - СНЯТИЕ
1. REMOVE FRONT BUMPER COVER LOWER |
Remove the clip, 5 bolts and front bumper cover lower.
2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY |
Remove the 4 bolts.
Unhook the engine under cover from the vehicle body as shown in the illustration.
3. REMOVE FRONT FENDER APRON SEAL RH |
Remove the 4 clips and fender apron seal.
4. REMOVE RESONATOR WITH AIR CLEANER CAP SUB-ASSEMBLY |
Disconnect the sensor connector.
Detach the wire harness clamp.
Loosen the hose clamp and remove the resonator with air cleaner cap.
Detach the 4 hook clamps, and then remove the air cleaner cap and resonator with air cleaner cap.
5. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY |
6. REMOVE AIR CLEANER CASE ASSEMBLY |
Remove the 3 bolts and air cleaner case.
7. REMOVE VANE PUMP V BELT |
Loosen bolt and nut, and remove the V belt.
8. REMOVE COOLER COMPRESSOR V BELT |
Loosen nut and adjusting bolt, and remove the V belt.
*1 | Adjusting Bolt |
9. REMOVE FAN AND GENERATOR V BELT |
Loosen 2 bolts.
Loosen adjusting bolt, and remove the V belt.
*1 | Adjusting Bolt |