ПЕРВИЧНЫЙ ВАЛ - ПОВТОРНАЯ СБОРКА

Using SST and a press, install a new front bearing.

• SST
• 09950-60010(09951-00400)
  09950-70010(09951-07100)

Select a snap ring that will allow minimal axial play.

• Standard clearance:
• 0.10 mm (0.0039 in.) or less

• Standard Front Bearing Shaft Snap Ring:

• Mark	Thickness
  0	2.05 to 2.10 mm (0.0807 to 0.0827 in.)
  1	2.10 to 2.15 mm (0.0827 to 0.0847 in.)
  2	2.15 to 2.20 mm (0.0847 to 0.0866 in.)
  3	2.20 to 2.25 mm (0.0866 to 0.0886 in.)
  4	2.25 to 2.30 mm (0.0886 to 0.0906 in.)
  5	2.30 to 2.35 mm (0.0906 to 0.0925 in.)

Using a snap ring expander, install the snap ring.

Coat the 13 input shaft bearings with MP grease and install them to the input shaft.

Coat the No. 2 synchronizer ring with gear oil and install it to the input shaft.