Land Cruiser Prado GRJ150 TRJ150 TRJ155 KDJ150 TRJ155 LJ150 - СИСТЕМА УПРАВЛЕНИЯ ДВИГАТЕЛЕМ 5L-E
DESCRIPTION
INSPECTION PROCEDURE
CHECK DTC OUTPUT (CHECK IF DTC 17 (1) IS OUTPUT AGAIN)
DTC 17 (1) Interior IC Malfunction
DESCRIPTION
| DTC No. | DTC Detection Condition | Trouble Area |
| 17 (1) | ECU malfunction. | ECM |
INSPECTION PROCEDURE
- УКАЗАНИЕ:
- Read freeze frame data using the intelligent tester. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.
| 1.CHECK DTC OUTPUT (CHECK IF DTC 17 (1) IS OUTPUT AGAIN) |
Connect the intelligent tester to the DLC3.
Clear the DTC (See page ).
Turn the ignition switch off for 30 seconds or more.
Turn the ignition switch to ON and turn the tester on.
Enter the following menus: Powertrain / Engine and ECT / DTC.
Read the DTCs (See page ).
| Result | Proceed to |
| DTC 17 (1) output again | A |
| No DTC output | B |
|
| ||||
| A | ||
| ||