Starter - Reassembly
Apply high-temperature grease to the drive lever set pin, as shown in the illustration.
Starter - Inspection
Perform pull-in test:
Starter - Disassembly
Remove the nut, and disconnect the lead wire from terminal C.
Starter - Removal
Remove the 11 clips and intake duct seal.
Starter - Components
Lexus IS250 IS220d GSE20 ALE20 4GR-FSE STARTING
Entry And Start System - Power Source Mode Does Not Change To On (Acc)
When the engine switch is pushed with the electrical key in the cabin, the power source control ECU receives signals to switch the power source mode.
Entry And Start System - Power Source Mode Does Not Change To On (Ig)
When the engine switch is pushed with the electrical key in the cabin, the power source control ECU receives signals to switch the power source mode.
Entry And Start System - Power Source Mode Does Not Change To On (Ig And Acc)
When the engine switch is pushed with the electrical key in the cabin, the power source control ECU receives signals to switch the power source mode.
Entry And Start System - Engine Switch Indicator Circuit
Engine start conditions or system malfunctions can be checked by the status of the engine switch indicator light.
Entry And Start System - Engine Does Not Start
A/T Models: If the engine switch is pressed with the shift lever in P or N and the brake pedal depressed, the power source control ECU determines that it is an engine start request.