| Website of Auto-Master.su

License Plate Light Assembly - Components

Lexus IS250 IS220d GSE20 ALE20 LIGHTING

Install the rear light assembly with the 3 nuts.

Connect the connector.

Measure the resistance according to the value(s) in the table below.

Standard resistance:
Tester Connection Condition Specified Condition
1 - 2 OFF 10 kΩ or higher
1 - 2 ON Below 1 Ω

If the result is not as specified, replace the switch assembly.

Remove the rear combination light body gasket.

Remove the 3 bolts and 3 rope hook assemblies.

Disconnect the connector from the rear outer combination light.

Lexus IS250 IS220d GSE20 ALE20 LIGHTING

Install the fog light assembly with the bolt and 3 pins.

Install the fog light bulb.

Subscribe to