Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Condition	Specified Condition
  1 - 2	20°C (68°F)	6.9 to 7.9 Ω

If the result is not as specified, replace the oil control valve assembly.

Raise the front of the V-bank cover to detach the 3 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.

Connect the intelligent tester to the DLC3.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 3UR-FE ENGINE CONTROL

Check for DTCs ().

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 3UR-FE ENGINE CONTROL

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 3UR-FE ENGINE CONTROL

The MIL (Malfunction Indicator Lamp) is used to indicate vehicle malfunction detections by the ECM. When the engine switch is turned on (IG), power is supplied to the MIL circuit, and the ECM provides the circuit ground which illuminates the MIL.

When the vehicle is being driven, depressing the accelerator pedal sensor assembly and brake pedal will activate the brake override system to restrict driving torque. The conditions for activating the brake override system as well as the items that are controlled are explained below.

When the engine is cranking, the starter operation signal is sent to the ECM STA terminal.