Land Cruiser URJ200 URJ202 GRJ200 VDJ200 1VD-FTV ENGINE CONTROL

Warm up the engine.

If any of the following DTCs are stored, the ECM enters fail-safe mode to allow the vehicle to be driven temporarily.

Check and ensure the following conditions:

Connect the intelligent tester to the DLC3.

The diagnosis system operates in "normal mode" during normal vehicle use. In normal mode, "2 trip detection logic" is used to ensure accurate detection of malfunctions. "Check mode" is also available to technicians as an option. In check mode, "1 trip detection logic" is used for simulating malfunction symptoms and increasing the ability of the system to detect malfunctions, including intermittent malfunctions ().

Measure the voltage according to the value(s) in the table below.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 1VD-FTV ENGINE CONTROL

Connect the intelligent tester to the DLC3.

After replacing fuel injector(s) with new one(s), input compensation code(s) of fuel injector(s) into ECM as follows: