License Plate Light Assembly (For Standard) - Components
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 LIGHTING EXT
License Plate Light Assembly (For Double Swing Out Type) - Installation
Install the 2 license plate light bulbs to the license plate light socket and wire.
License Plate Light Assembly (For Double Swing Out Type) - Components
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 LIGHTING EXT
Back-Up Light Assembly (For Spare Wheel Carrier) - Installation
Attach the clip to install the rear light.
Back-Up Light Assembly (For Spare Wheel Carrier) - Removal
Remove the 3 nuts.
Back-Up Light Assembly (For Spare Wheel Carrier) - Components
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 LIGHTING EXT
Back-Up Light Assembly (For Standard) - Installation
Connect the connector.
Back-Up Light Assembly (For Standard) - Inspection
Apply battery voltage to the terminals of the connector, and check the LED illumination condition.
- OK:
Measurement Condition Specified Condition Battery positive (+) → Terminal 3 (T/P)
Battery negative (-) → Terminal 1 (E)Light illuminates
If the result is not as specified, replace the rear light assembly.
Back-Up Light Assembly (For Standard) - Removal
Put protective tape around the rear light assembly LH.