Exhaust Fuel Addition Injector (For Dpf) - Inspection
Measure the resistance according to the value(s) in the table below.
Exhaust Fuel Addition Injector (For Dpf) - Removal
Remove the 3 bolts and screw.
Exhaust Fuel Addition Injector (For Dpf) - Components
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 1VD-FTV EMISSION CONTROL
Fuel Tank Cap - Inspection
Visually check that the cap and gasket are not deformed or damaged.
If the result is not as specified, replace the fuel tank cap assembly or gasket.
Exhaust Gas Temperature Sensor (For Dpf) - Installation
Using a 14 mm union nut wrench, install the No. 3 exhaust gas temperature sensor.
Exhaust Gas Temperature Sensor (For Dpf) - Inspection
Measure the resistance according to the value(s) in the table below.
Exhaust Gas Temperature Sensor (For Dpf) - Components
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 1VD-FTV EMISSION CONTROL
Egr Cooler - Installation
Using an E6 "TORX" socket wrench, install the 4 stud bolts to the EGR cooler.