For parking assist monitor system (w/ Side Monitor System) diagnosis, signals received by the parking assist ECU can be checked and the parking assist monitor system (w/ Side Monitor System) can be calibrated, adjusted and checked using the multi-display assembly.

Disconnect the F75 and F76 parking assist ECU connectors.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 PARK ASSIST / MONITORING

This parking assist monitor system (w/ Side Monitor System) can be set from the diagnostic screen of the multi-display assembly.

When "System initializing" is displayed on the multi-display assembly, correct the steering angle neutral point using the following method.

Measure the battery voltage with the engine switch off.

• Standard voltage:
• 11 to 14 V

If the voltage is below 11 V, replace or recharge the battery before proceeding.

This system has a rear television camera assembly mounted on the back door to display the rear view of the vehicle on the multi-display assembly. The display panel also shows a composite view consisting of the area behind the vehicle and parking guidelines to assist the driver in parking the vehicle by monitoring the area behind the vehicle.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 PARK ASSIST / MONITORING

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 PARK ASSIST / MONITORING

Pay attention to the following points when servicing.