A maximum of 5 master key codes and 3 sub key codes can be registered.

Check for DTCs ().

Clear the DTCs ().

This code is stored when an ECM that is incompatible with the engine immobiliser system is installed to the vehicle.

When the communication line (IMI - EFIO) between the ECM and transponder key ECU assembly is stuck on HI output, the ECM stores this DTC.

This DTC is stored when one of the following occurs: 1) the ECM detects errors in its own communications with the transponder key ECU assembly; 2) the ECM detects errors in the communication lines; or 3) the ECU - ECM communication ID between the transponder key ECU assembly and ECM is different and an engine start is attempted. Before troubleshooting for this DTC, make sure no engine immobiliser DTCs are output. If output, troubleshoot the engine immobiliser DTCs first.

Clear the DTCs ().

Clear the DTCs ().

The antenna coil receives key code signals from the transponder chip in the key grip. The antenna coil is built into the transponder key amplifier, which amplifies the key code signals and outputs the signals to the transponder key ECU assembly.

This DTC is stored when there is an open or short in the antenna coil.

This DTC is stored when a key with a different vehicle serial number is inserted into the ignition key cylinder.