Remove the front seat assembly ().

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 SEAT BELT

The combination meter detects the state of the front seat inner belt assembly (for Front Passenger Side) when the front passenger seat is occupied with the ignition switch ON. If the front passenger seat belt is not fastened, the front passenger side seat belt warning light on the multi-display assembly*1 or clock assembly*2 blinks. If the seat belt is fastened, the warning light goes off.

When the ignition switch ON, the center airbag sensor assembly*1 (main body ECU [cowl side junction block LH]*2) transmits front seat inner belt state signals to the combination meter assembly through the CAN. If the driver seat belt is not fastened, the combination meter assembly blinks the driver side seat belt warning light. If the seat belt is fastened, the warning light goes off.

Connect the intelligent tester to the DLC3.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 SEAT BELT

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 SEAT BELT

Customizing with the intelligent tester

Turn the ignition switch to ON.

If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.