Install the seat belt with the bolt.

Remove the rear No. 1 seat assembly ().

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 SEAT BELT

Align the claws with the seat belt positioning holes and install the retractor of the seat belt as shown in the illustration.

When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

If the operation is not as specified, replace the belt.

Remove the rear No. 2 seat assembly ().

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 SEAT BELT

Check if SST is functioning properly.

Align the anchor plate positioning hole with the claw, and install the anchor plate with the 2 bolts.

Check the ELR.