Entry And Start System - Antenna Circuit
Terminals ANT1 and ANT2 of the antenna (door outside handle) detect if the electrical key is within the action area around the door outside handle.
Entry And Start System - Touch Sensor Circuit
This circuit receives the signal indicating whether or not a touch sensor signal is detected.
Entry And Start System - Entry Lock Switch Circuit
The entry lock switches (trigger switch) are built into the outside handles of the LH/RH door. The certification ECU detects the conditions of the each lock switch.
Entry And Start System - Door Oscillator Circuit
Door oscillators are built into each door. Each of them forms its own action area around its door and detects the presence of the electrical key.
Entry And Start System - On-Vehicle Inspection
Check the entry unlock function.
Dtc B1242 Wireless Door Lock Tuner Circuit Malfunction
Disconnect the P33 ECU connector.
Entry And Start System - Diagnostic Trouble Code Chart
Lexus IS250 IS220d GSE20 ALE20 DOOR LOCK
Entry And Start System - Data List / Active Test
Connect the intelligent tester to the DLC3.
Entry And Start System - Dtc Check / Clear
Connect the intelligent tester to the DLC3.
Entry And Start System - Diagnosis System
Smart access system with push-button start data and the Diagnostic Trouble Codes (DTCs) can be read in the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the intelligent tester to check for malfunctions and perform repairs.