Remove the 11 clips and intake duct seal.

Remove the 11 clips and intake duct seal.

Connect the intelligent tester to the DLC3.

Lexus IS250 IS220d GSE20 ALE20 BRAKE CONTROL

Lexus IS250 IS220d GSE20 ALE20 BRAKE CONTROL

In the Test Mode (signal check), a malfunction of the speed sensor that cannot be detected when the vehicle is stopped is detected while driving.

Transition to the sensor check mode can be performed by connecting terminals TS and CG of the DLC3 and turning the engine switch from off to on (IG).

In the Test Mode (signal check), a malfunction of the speed sensor that cannot be detected when the vehicle is stopped is detected while driving.

Transition to the sensor check mode can be performed by connecting terminals TS and CG of the DLC3 and turning the engine switch from off to on (IG).

Connecting terminals TC and CG of the DLC3 causes the ECU to display the DTC by blinking the ABS warning light.

Connecting terminals TC and CG of the DLC3 causes the ECU to display the DTC by blinking the ABS warning light.

The skid control buzzer sounds while the accumulator pressure is abnormally low or when an abnormality causing low fluid pressure occurs, and then the VSC is activated.