Attach the 2 claws to install the switch.

Measure the resistance according to the value(s) in the table below.

Place protective tape as shown in the illustration.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 3UR-FE STARTING

Install the flywheel housing side cover.

Apply high-temperature grease to the areas of the starter pinion drive lever indicated in the illustration.

Perform a pull-in test.

Remove the nut and disconnect the lead wire from the magnet starter switch.

()

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 3UR-FE STARTING