If the following conditions are detected while the dynamic radar cruise control system is in operation, the system clears the stored vehicle speed in the ECM and cancels the dynamic radar cruise control operation.

Connect the intelligent tester to the DLC3.

The diagnosis function makes the master warning light and the multi-information display come on, and the cruise control indicator light goes off as shown in the illustration. When a malfunction occurs in the dynamic radar cruise control system, DTCs are stored in the ECM.

Disconnect the A38*1 and C45*1 or A52*2 and C46*2 ECM connectors.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 CRUISE CONTROL

Connect the Techstream to the DLC3.

Turn the cruise control main switch on.

If the voltage is below 11 V, recharge or replace the battery before proceeding.

The dynamic radar cruise control system has 2 cruise control modes: the constant speed control mode and vehicle-to-vehicle distance control mode.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 CRUISE CONTROL