Remove the magnets, and use them to collect steel particles.

Remove the nut, spring washer and control shaft lever RH.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 A750F AUTOMATIC TRANSMISSION / TRANSAXLE

Using a vernier caliper and straightedge, measure dimension A between the end surface of the engine and the torque converter contact surface of the drive plate.

Remove the 3 bolts and screw.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 A750F AUTOMATIC TRANSMISSION / TRANSAXLE

Install the floor shift with the 4 bolts. Tighten the bolts in the order shown in the illustration.

Attach the 3 claws to install the ECU to the floor shift.

Measure the resistance according to the value(s) in the table below.

Using a thin-bladed screwdriver, release the connector housing retainer.