Clutch Pedal Switch (For Rhd) - Installation
Install the clutch start switch with the nut.
Clutch Pedal Switch (For Rhd) - Inspection
Measure the resistance according to the value(s) in the table below.
Clutch Pedal Switch (For Rhd) - Removal
Disconnect the connector.
Clutch Pedal Switch (For Rhd) - Components
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 CLUTCH
Clutch Pedal Switch (For Lhd) - Installation
Install the clutch start switch with the nut.
Clutch Pedal Switch (For Lhd) - Inspection
Measure the resistance according to the value(s) in the table below.
Clutch Pedal Switch (For Lhd) - Removal
Remove the 2 screws.
Clutch Pedal Switch (For Lhd) - Components
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 CLUTCH
Clutch Unit (For 1Vd-Ftv) - Installation
Insert SST into the clutch disc, then insert the clutch disc into the flywheel.
Clutch Unit (For 1Vd-Ftv) - Inspection
Using a vernier caliper, measure the rivet depth.
- Minimum Rivet Depth:
- 0.3 mm (0.0118 in.)
If the depth is less than the minimum, replace the clutch disc assembly.