Center Differential Lock Switch - Inspection
Measure the resistance according to the value(s) in the table below.
Center Differential Lock Switch - Components
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 JF2A TRANSFER / 4WD / AWD
Transfer Assembly - Installation
Install the transfer with the 8 bolts.
Transfer Assembly - Reassembly
Install a new needle roller bearing.
Transfer Assembly - Inspection
Using a micrometer, measure the diameter of the input shaft journal surface.
- Minimum Diameter:
- 68 mm (2.68 in.)
If the diameter is less than the minimum, replace the input shaft.
Transfer Assembly - Disassembly
Remove the bolt and bracket.
Transfer Assembly - Removal
except 1GR-FE:
Remove the 2 bolts and transfer dynamic damper.
Transfer Assembly - Components
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 JF2A TRANSFER / 4WD / AWD