Using a drill, make a hole in the area between A and B of the accumulator housing indicated in the illustration to discharge the inside gas and oil.

Install the stabilizer control with accumulator housing with the 2 bolts.

Apply a small amount of suspension fluid to a new O-ring and install it to the shutter valve.

Remove the cap from the oil nozzle valve.

Detach the clamp, and disconnect the connector from the protector.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 SUSPENSION CONTROL

Install the cylinder to the bracket with the 2 nuts.

for 1GR-FE:

Remove the tailpipe ().

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 SUSPENSION CONTROL

Place the accumulator in a vise and saw a hole between A and B shown in the illustration using a saw to discharge the gas inside.