Measure the resistance according to the value(s) in the table below.

Remove the 6 bolts and side step.

Remove the clip.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 SUSPENSION CONTROL

Place the accumulator in a vise and saw a hole between A and B shown in the illustration using a saw to discharge the gas inside.

Install the control valve to the vehicle with the 3 bolts.

Measure the resistance according to the value(s) in the table below.

Remove the 6 bolts and side step.

Remove the clip.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 SUSPENSION CONTROL