Tire Pressure Warning Receiver - Components
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 TIRE PRESSURE MONITORING
Tire Pressure Warning Antenna (For Rear Side) - Installation
Connect the connector to the tire pressure warning antenna.
Tire Pressure Warning Antenna (For Rear Side) - Components
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 TIRE PRESSURE MONITORING
Tire Pressure Warning Antenna (For Front Side) - Installation
Connect the connector to the tire pressure warning antenna.
Tire Pressure Warning Antenna (For Front Side) - Components
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 TIRE PRESSURE MONITORING
Tire Pressure Warning System - Tc And Cg Terminal Circuit
DTC output mode is set by connecting terminals 13 (TC) and 4 (CG) of the DLC3. The DTCs are indicated by the tire pressure warning light blinking pattern.
Tire Pressure Warning System - Ecu Power Source Circuit
This is the power source for the tire pressure warning ECU and receiver.
Tire Pressure Warning System - Tire Pressure Warning Light Circuit
If the ECU detects trouble, the tire pressure warning light blinks (illuminates after blinking for 1 minute) and tire pressure monitoring is canceled at the same time. At this time, the ECU stores a DTC in the memory.
Connect terminals TC and CG of the DLC3 to make the tire pressure warning light blink and output the DTC.