Place the brake booster accumulator assembly in a vise and cover it with cloth.

Install a new brake booster gasket to the hydraulic brake booster.

Apply lithium soap base glycol grease to a new piston.

Apply battery voltage to the brake booster pump cables, and check the operation of the pump motor.

Using a 5 mm hexagon wrench, remove the bolt and No. 1 brake actuator bracket.

Detach the 7 claws and 4 clips, and remove the scuff plate.

Inspect the battery voltage.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 BRAKE SYSTEM OTHER

Install the brake pedal support assembly with the 4 nuts.

Install the stop light switch mounting adjuster to the brake pedal support.