The telescopic motor is operated by the power source voltage supplied from the multiplex tilt and telescopic ECU and slides the steering column forward and backward. The telescopic position sensor (Hall IC) in the telescopic motor detects the sliding position in the forward and backward directions of the steering column and outputs a signal to the multiplex tilt and telescopic ECU based on that sliding amount.

A key code confirmation signal (ON or OFF) is sent from the main body ECU to the multiplex tilt and telescopic ECU via the communication bus.

The multiplex tilt and telescopic ECU uses this signal to operate the auto away/return function.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 STEERING COLUMN

Connect the intelligent tester to the DLC3.

If a malfunction in the tilt position sensor signal or telescopic position sensor signal occurs while operating the power tilt or power telescopic function, the tilt and telescopic ECU stops the operation of the power tilt and power telescopic steering column system.

Connect the intelligent tester to the DLC3.

Connect the intelligent tester to the DLC3.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 STEERING COLUMN

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 STEERING COLUMN

Connect the intelligent tester to the DLC3.