Relay - Inspection Read more about Relay - Inspection Push in the plunger and release it. Check that it returns quickly to its original position.
Relay - Removal Read more about Relay - Removal for Gasoline Engine:Remove the upper radiator support seal ().
Remote Control Switch - Inspection Read more about Remote Control Switch - Inspection Apply battery voltage and check operation of the remote control switch, as shown in the table below.
Remote Control Switch - On-Vehicle Inspection Read more about Remote Control Switch - On-Vehicle Inspection Connect the remote control switch connector.
Remote Control Switch - Parts Location Read more about Remote Control Switch - Parts Location Land Cruiser URJ200 URJ202 GRJ200 VDJ200 WINCH
Winch Unit - Installation Read more about Winch Unit - Installation Using a crane or equivalent, install the winch assembly.
Winch Unit - Reassembly Read more about Winch Unit - Reassembly Install the brush spring as shown in the illustration.
Winch Unit - Inspection Read more about Winch Unit - Inspection Inspect the wire for the following damage: 1) areas where several strands are severed; 2) areas where the diameter is less than 7.5 mm (0.295 in.); 3) kinks; 4) corrosion; and 5) fraying.If the wire is damaged, replace it with a new one.