Rear Bumper -- Installation |
- HINT:
- A bolt without a torque specification is shown in the standard bolt chart (Toyota Fortuner RM00000118W017X.html).
| 1. INSTALL REAR BUMPER CENTER BRACKET |
- HINT:
- Use the same procedure for both rear bumper center brackets.
Install the rear bumper center bracket with the bolt.
- Torque:
- 12 N*m{122 kgf*cm, 9 ft.*lbf}
| 2. INSTALL REAR BACK STEP FRAME |
Install the rear back step frame with the 6 bolts.
- Torque:
- 18 N*m{184 kgf*cm, 13 ft.*lbf}
| 3. INSTALL REAR BUMPER EXTENSION RH |
Install the rear bumper extension with the bolt.
- Torque:
- 18 N*m{184 kgf*cm, 13 ft.*lbf}
| 4. INSTALL REAR BUMPER SIDE RETAINER LH |
Attach the 4 claws to install the rear bumper side retainer.
Install the 2 screws.
| 5. INSTALL REAR BUMPER SIDE RETAINER RH |
- HINT:
- Use the same procedure described for the LH side.
| 6. INSTALL REAR NO. 1 WHEEL OPENING EXTENSION LH |
Install 6 new clips to the rear No. 1 wheel opening extension.
Attach the 6 clips to install the rear No. 1 wheel opening extension.
Install the 2 screws.
| 7. INSTALL REAR NO. 1 WHEEL OPENING EXTENSION RH |
- HINT:
- Use the same procedure described for the LH side.
| 8. INSTALL REAR BODY MUDGUARD SUPPORT LH |
Install the rear body mudguard support with 2 new grommets.
| 9. INSTALL REAR BODY MUDGUARD SUPPORT RH |
- HINT:
- Use the same procedure described for the LH side.
| 10. INSTALL REAR BUMPER COVER |
Attach the 8 claws to install the rear bumper cover.
Install the 6 screws and 2 clips.
Install the 3 clips.
| 11. INSTALL REAR QUARTER PANEL MUDGUARD LH |
Install the rear quarter panel mudguard with the 6 screws.
| 12. INSTALL REAR QUARTER PANEL MUDGUARD RH |
- HINT:
- Use the same procedure described for the LH side.